Try it freeNothing is charged today: 24 hours on one car with E-Sys MAX Demo. Cancel within 24 hours and you pay nothing. No car, no charge.
E-Sys MAX
Buy

What do I need to code my BMW?

The full shopping list for coding a BMW yourself, what each part costs, and what you can skip.

Short answer

To code a BMW F, G or I series or a MINI yourself you need a Windows 10 or 11 laptop, an ENET cable (OBD to network cable, usually $15 to $30), BMW E-Sys with PSdZData for your car, a launcher such as E-Sys MAX to start E-Sys and show the settings in English, and a battery charger so the voltage stays up while you code. With those, most popular changes take a few minutes.

The checklist

WhatWhy you need itTypical cost
Windows 10 or 11 laptopE-Sys runs on Windows only. Any laptop from the last 10 years with an Ethernet port (or a USB network adapter) is enough. A Mac works only with Windows in a virtual machine.The one you have
ENET cableConnects the laptop's network port to the car's OBD port. F, G and I series code over Ethernet, not over the old K+DCAN cable.About $15 to $30
BMW ICOM (optional)A workshop interface. Not needed for coding at home; an ENET cable does the same job for coding.Skip it
BMW E-SysBMW's own engineering program that reads and writes coding. See BMW E-Sys coding.Not sold by us
PSdZDataThe data files E-Sys needs to know your car's modules. Newer cars need newer PSdZData. See PSdZData explained.Not sold by us
E-Sys launcherStarts E-Sys ready to use. E-Sys MAX also names 130,000+ settings in English, offers one-click coding changes and makes a backup before every change.From $39; lifetime $99
Battery charger or power supplyCoding with the engine off drains the battery. Low voltage is the most common reason a coding run fails.About $40 to $100

Step by step

  1. Get the cable and the charger. Plug the charger in before you start.
  2. Install E-Sys and PSdZData on the laptop. E-Sys MAX does not include them.
  3. Install a launcher and start E-Sys from it. See the E-Sys MAX quick start.
  4. Connect: ignition on, ENET cable in the OBD port under the dashboard, then connect in E-Sys.
  5. Back up the car's coding before the first change.
  6. Pick a change from a list for your model, such as the G20, G05, G30, F30 or F10 list, code it and test it.

Which cars can I code this way?

BMW F series (about 2008 to 2019), G series (from about 2016), I series (i3, i8, iX, i4) and MINI F56 and newer. Older E series cars use other tools and are not covered here. Some modules on newer cars need BMW-signed coding: see NCD 2.0 and secure coding and coding by series.

Questions

Can I code my BMW with just my phone?

Phone apps with an OBD adapter can do a fixed list of popular changes. For every setting in every module, and for full backups, you need a laptop with E-Sys. See E-Sys or a phone app.

Do I need an ICOM to code a BMW?

No. For coding an ENET cable is enough. An ICOM is a workshop interface used mainly for programming (flashing). See ENET and ICOM connection.

How much does it cost to code a BMW yourself?

Usually under $200 in total: an ENET cable (about $15 to $30), a battery charger if you do not have one, and a launcher (E-Sys MAX lifetime is $99). After that, every change on every car you own costs nothing extra.

Is it hard to code a BMW for the first time?

Plain E-Sys is hard because settings show as German short names or dots. With English names, ready-made changes and a backup before each change, a first change like digital speed or mirror folding takes a few minutes.

Is BMW coding safe?

Coding changes settings, not the module's software, and a module can be coded back from a backup. Keep a charger connected and change one module at a time. More in Is BMW coding safe?

Got the cable? Start coding in English

E-Sys MAX starts your E-Sys, names every setting and backs up before each change. Lifetime $99.